Yokogawa Standalone MW100 - Manual (Page 15)

1-1
IM MW100-01E
Explanation of Functions
1
2
3
4
5
App
Index
1.1 System Overview
MW100 Data Acquisition Unit
The MW100 Data Acquisition Unit consists of a main module equipped with an Ethernet
port, I/O modules for input and output of signals (these are the same as those for the
MX100 Data Acquisition Unit), and a base plate on which the first two items are mounted.
The main module comes with an HTTP server function, allowing users to easily enter
settings, acquire data, and monitor measured data from a PC using a browser. The
main module also comes with a Modbus/TCP function that allows multiple units to be
connected.
System Configuration
The MW100 Data Acquisition Unit can be flexibly configured for a variety of measuring
environments such as a small-scale system that acquires data on site in a standalone
configuration or a system that allows data acquisition of up to 360 channels using the
Modbus/TCP function.
One-to-one Connection with a PC
This is an example of a system for small scale logging, setting the IP address, and other
tasks.
MW100
MW100 Data Acquisition Unit
Ethernet port
Using a browser:
• Easy setting entry
• Monitoring of measured
and computed data
Using PC software:
• IP address setting
• Calibration Hub
Input/Output module
Main module
PC
Standalone Configuration
This is an example of configuration for an on-site standalone data acquisition system.
PC
CF card
MW100 Data Acquisition Unit
MW100
Data display using MW100 Viewer Software
Chapter 1 Explanation of Functions