Yokogawa Standalone MW100 - Manual (Page 2)

i
IM MW100-01E
Thank you for purchasing the MW100 Data Acquisition Unit. This user’s manual contains
useful information about the instrument’s functions, installation and wiring procedures,
operating procedures, and handling precautions. To ensure correct use, please read
this manual thoroughly before beginning operation. The following manuals relating to
the MW100 Data Acquisition Unit are provided in addition to this one. Read them along
with this manual. The MW100 Data Acquisition Unit Operation Guide (IM MW100-
02E), MW100 Viewer Software User’s Manual (IM MW180-01E), and Communication
Command Manual (IM MW100-17E) are all available on the MW100 Manual CD-ROM.
Manual Title Manual No. Description
MW100 Data Acquisition Unit
Operation Guide
IM MW100-02E Describes concisely the handling of the
MW100 Data Acquisition Unit and the basic
operations of the MW100 Viewer Software.
MW100 Communication
Command Manual
IM MW100-17E Describes the communication command of
the MW100 main module.
MW100 Connecting Ethernet
and Checking the Connection
IM MW100-71E Explains the procedure to check the
Ethernet connection.
Precautions on the Use of the
MX100/MW100
IM MX100-71E Summarizes the precautions regarding the
use of the MW100 Data Acquisition Unit.
MX100/MW100 Data Acquisition
Unit Installation and Connection
Guide
IM MX100-72E Describes concisely the installation
procedures and wiring procedures of the
MW100 Data Acquisition Unit.
MX100/MW100 Quick Start
Package Checking the Contents
of the Package
IM MX100-79E Explains the contents of the quick start
package (/SL1, /SL2, and /SL3 options).
Control of pollution caused by
MX100/MW100 products
IM MX100-91C Describes control of pollution caused by the
product.
772075 AC Adapter IM 772075-01E Describes the specifications of the AC
adapter (power supply suffix code “-2”).
MW100 Viewer Software User’s
Manual
IM MW180-01E Describes the functions and operations of
the MW100 Viewer Software that comes
standard with the MW100 main module.
Notes
• This manual describes the MW100 Data Acquisition Unit, style number “S3.” The style
number is located on the name plate of the main module (see IM MW100-02E for the
location of the name plate).
• When configuring an MW100 system, the versions of the instruments used in the
system indicated by the hardware style number and software release number must
meet the following conditions.
• The main module style number must be greater than or equal to the style numbers
of any input/output modules.
• The PC software release number must be greater than or equal to the style number
of the main module.
Certain functions may become disabled on instruments or software that do not meet
these conditions, or the system may not be able to be built.
• The contents of this manual are subject to change without prior notice as a result of
continuing improvements to the instrument’s performance and functions.
• Every effort has been made in the preparation of this manual to ensure the accuracy
of its contents. However, should you have any questions or find any errors, please
contact your nearest YOKOGAWA representative, dealer, or sales office.
• Copying or reproducing all or any part of the contents of this manual without the
permission of Yokogawa Electric Corporation is strictly prohibited.
• The TCP/IP software of this product and the document concerning the TCP/IP software
have been developed/created by YOKOGAWA based on the BSD Networking Software,
Release 1 that has been licensed from the University of California at Berkeley.
4th Edition : March 2012 (YK)
All Rights Reserved, Copyright © 2005 Yokogawa Electric Corporation