Yokogawa Standalone MW100 User Manual
Page 189
3-67
IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
Graph Scale Settings
1.
From the top screen, click
Display Setting > Graph Scale Setting.
2.
Select the channel group you wish to set from the
Channel List list.
3.
Select Linear or Log in the
Scale list.
4.
Select the number of divisions in the
Div list. It can only be selected when
set to Linear display. If you select Auto, the number of divisions is determined
automatically from the scale or span of the specified channel.
5.
Select a display position of Normal or Center in the
Bar Graph Type list. The
digital or bar graph display is updated accordingly.
6.
Specify a percentage from the top or bottom in the
Zone boxes. Enter a Lower
value of 0 to 95 (%), and an upper value from 5 to 100 (%).
7.
Click the
Apply button. The setting changes take effect.
3.16 Measured Data Monitor Display/Settings