Yokogawa Standalone MW100 - Manual (Page 156)

3-34
IM MW100-01E
Alarm Setting (MATH)
You can set MATH channel alarms.
1. From the top screen, click Channel Setting > Alarm Setting (MATH).
2. Below, enter settings in the same manner as with measurement alarms. With
MATH alarms, there is no hysteresis setting.
Delay Alarm Setting
Set the delay time for using the delay alarm.
1. From the top screen, click Channel Setting > Delay Alarm Setting.
2. In the Channel List list, select the channels you want to set.
3. Enter the delay time in the range of 1 to 3600 (s) in the Time box of the channel
number you want to set. Set the time so that it is an integer multiple of the
measurement or MATH interval.
4. Click the Apply button. The setting changes take effect.
3.7 Setting Alarms