Measurement channel settings – Yokogawa Standalone MW100 User Manual
Page 146
3-24
IM MW100-01E
3.5 Setting Measurement Conditions
(Measurement Channel Settings)
Setting Mode
Measurement Channel Settings
You can set the input type, range, span, and computation (linear scaling and differential
computation between channels).
The selectable input type, range, and other settings can differ depending on the module.
For details, see the explanation of the functions of individual modules in chapter 1,
“Explanation of Functions,” or chapter 5, “Specifications.”
Setting the Input Range
1.
From the top screen, click
Channel Setting > AI/DI Channel Setting.
2.
Select the channel group you wish to set from the
Channel List list.
Setting the Input Mode
3.
Select the input type from the
Mode list.
Setting the Measurement Range
4.
Select the measurement range from the
Range list.
Setting the Measurement Span
Determines the actual measurement range from the measurable range.
5.
Enter the lower and upper limit of Span in the
Lower or Upper boxes under Span.
Remote RJC (RRJC) Reference Channel Setting
This is required when RRJC is selected for the input type.
6.
Enter the remote RJC reference channel number in the
Ref. Ch. box.
7.
Click the
Apply button. The setting changes take effect.