Yokogawa Standalone MW100 - Manual (Page 186)

3-64
IM MW100-01E
• Report - Digital
Select a report file to display of Daily, Weekly, or Monthly and a date from the report
file selection list then click the Update button.
In the example below, the hourly report from 16:00 to 17:00 in the daily report file is
displayed.
Report file selection
Select displayed data
Select Report– Digital.
Scroll
Scrolls vertically or horizontally,
and changes the display range.
Type, Date/Time, Status
• Displays the report type.
• Displays the date and time of writing.
• Displays error (Er), over (Ov), or power failure (Pw).
Report data
Displays the average, maximum, minimum, integral,
and instantaneous values for each channel.
Measurement/MATH channel and units
The tag name can also be displayed.
The sum scale is displayed in brackets [ ].
• Report - Graph
File/channel select button
• File button:
Opens the file selection screen.
• Ch button:
Opens the channel selection screen.
Select displayed data
Select Report– Graph.
Type, autoscale
Select a display type.
• Sum graph button:
Displays the integral value for each channel in a bar graph.
If the integral values are 0 or less, the bar graph will have
a height of 0.
• Maximum (Max), minimum (Min), and average (Ave)
graph buttons:
Displays the data for each channel in a broken line graph.
• Auto Scale button:
Click to automatically adjust the scale.
Display channel tag name
Shows the displayed channel and tag name.
3.16 Measured Data Monitor Display/Settings