Yokogawa Standalone MW100 - Manual (Page 175)

3-53
IM MW100-01E
Setting and Data acquisition
1
2
3
4
5
App
Index
Server Settings
These settings enable the various server functions.
1. From the top screen, click Communication Setting > Server Setting.
Keep Alive Function
2. Select the TCP Keep Alive check box to to enable the keepalive function.
For a description of the keepalive function, see “Communication” in section 5.2.
Communication Timeout Function
2. Select the Application Timeout check box to enable the application timeout
function when connecting to the MW100-specific communication (GENE) server.
3. Enter the timeout value for the connection to the GENE server in the Timeout
box.
Server Process
2. Select a delay time in the Modbus Delay Response list.
Server List Settings
4. To use a server, turn it On in the Action box of the corresponding server name.
The HTTP server is always turned On.
5. Enter the port number used by the server in the Port box. Normally, you can use
the default setting.
For a description of each server, see “Communication” in section 5.2.
6. Click the Apply button. The setting changes take effect.
3.14 Network Utility Settings