Yokogawa Standalone MW100 - Manual (Page 22)

1-8
IM MW100-01E
PC Software
The MW100 Data Acquisition Unit comes with the MW100 Viewer software program that
allows users to view measured data acquired by the MW100. MW100 Viewer consists
of the three software components described below. For a detailed description of the
functions of these software components, see the MW100 Viewer Software User’s Manual
(IM MW180-01E).
When configuring a system using the MW100, the software release number and
hardware style number matching conditions must be met (see “Notes” on page i).
MW100 IP Config Software
Sets the IP address on the MW100. This software is used when setting an IP address for
the first time, or if the current IP address needs to be changed.
MW100 Viewer
Enables you to (1) display measured, computed, and thinning data that has been stored,
(2) read values and perform computation over an area using cursors, and (3) convert the
measured and computed data into various file such as Excel.
MW100 Calibrator Software
This software is used to calibrate the input/output modules connected to the MW100. The
software does not support the pulse input, digital input, or digital output modules.
1.1 System Overview