In this chapter, Audience, About this document – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 19
Advertising

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
xv
53-1003031-02
About This Document
In this chapter
•
•
Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
•
•
•
•
Getting technical help or reporting errors . . . . . . . . . . . . . . . . . . . . . . . . . . . xix
Audience
This document is designed for system administrators with a working knowledge of Layer 2 and
Layer 3 switching and routing.
If you are using a Brocade device, you should be familiar with the following protocols if applicable to
your network – IP, RIP, OSPF, BGP, ISIS, IGMP, PIM, MPLS, and VRRP.
Advertising