Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 806)

782 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying VPLS auto-discovery information
8
Messages Sent The number of messages this device has sent to the neighbor. The display
shows statistics for the following message types:
•
Open
•
Update
•
KeepAlive
•
Notification
•
Refresh-Req
Messages Received The number of messages this device has received from the neighbor. The
message types are the same as for the Message Sent field.
Last Update Time The last time updates were sent and received for the following:
•
NLRIs
•
Withdraws
Last Connection Reset Reason The reason the previous session with this neighbor ended. The reason can
be one of the following:
•
Reasons described in the BGP specifications:
•
Message Header Error
•
Connection Not Synchronized
•
Bad Message Length
•
Bad Message Type
•
OPEN Message Error
•
Unsupported Version Number
•
Bad Peer AS Number
•
Bad BGP Identifier
•
Unsupported Optional Parameter
•
Authentication Failure
•
Unacceptable Hold Time
•
Unsupported Capability
•
UPDATE Message Error
•
Malformed Attribute List
•
Unrecognized Well-known Attribute
•
Missing Well-known Attribute
•
Attribute Flags Error
•
Attribute Length Error
•
Invalid ORIGIN Attribute
•
Invalid NEXT_HOP Attribute
•
Optional Attribute Error
•
Invalid Network Field
•
Malformed AS_PATH
•
Hold Timer Expired
•
Finite State Machine Error
•
Rcv Notification
TABLE 148 Output for the show ip bgp l2vpn vpls neighbors command (Continued)
This field... Displays...