Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 466
442
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls ldp
2
Examples
The following example displays the inbound FEC-filter configuration:
Brocade# show mpls ldp
Label Distribution Protocol version 1
LSR ID: 10.122.122.122, using Loopback 1 (deleting stops LDP)
Hello interval: Link 5 sec, Targeted 15 sec
Hold time value sent in Hellos: Link 15 sec, Targeted 45 sec
Keepalive interval: 10 sec, Hold time multiple: 3 intervals
Keepalive timeout: 30
Inbound FEC filtering prefix-list: list-abc
Tunnel metric: 0
FEC used for auto discovered peers: current 129, configured 129
Label Withdrawal Delay: 30s
Graceful restart: disabled
Reconnect time: 0 seconds, Max peer reconnect time: 120 seconds
Recovery time: 0 seconds, Max peer recovery time: 120 seconds
Forwarding state holding timer: not running
Label Withdrawal Delay: 30s
History
Release
Command history
Multi-Service IronWare R05.5.00 This command was enhanced to display the label withdrawal delay setting.
Related
Commands
None.