Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 833
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
809
53-1003031-02
Displaying 6PE information
9
Last Connection
Reset Reason
Shows the reason for ending the previous session with this neighbor. The reason can be one
of the following:
•
No abnormal error has occurred
•
Reasons described in the BGP specifications:
-
Message Header Error
-
Connection Not Synchronized
-
Bad Message Length
-
Bad Message Type
-
OPEN Message Error
-
Unsupported Version Number
-
Bad Peer AS Number
-
Bad BGP Identifier
-
Unsupported Optional Parameter
-
Authentication Failure
-
Unacceptable Hold Time
-
Unsupported Capability
-
UPDATE Message Error
-
Malformed Attribute List
-
Unrecognized Well-known Attribute
-
Missing Well-known Attribute
-
Attribute Flags Error
-
Attribute Length Error
-
Invalid ORIGIN Attribute
-
Invalid NEXT_HOP Attribute
-
Optional Attribute Error
-
Invalid Network Field
-
Malformed AS_PATH
-
Hold Timer Expired
-
Finite State Machine Error
-
Rcv Notification
-
Reset All Peer Sessions
-
User Reset Peer Session
-
Port State Down
-
Peer Removed
-
Peer Shutdown
-
Peer AS Number Change
-
Peer AS Confederation Change
-
TCP Connection KeepAlive Timeout
-
TCP Connection Closed by Remote
-
TCP Data Stream Error Detected
TABLE 156
Output parameters of the show ip bgp 6pe neighbors command
(Continued)
Field
Description