Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 315)

Brocade@XMR5# show mpls rsvp sess name xmr3-120
Codes: DI:Ingress Detour DT:Transit Detour DM:Merged Detour
DE:Egress Detour BI:Ingress Backup BM: Merged Backup BE:Egress Backup
RP:Repaired Session BYI: Bypass Ingress
To From St Style Lbl_in Lbl_out LSPname
10.33.33.33 10.55.55.55(RP) Up SE - 1032 xmr3-120
Tunnel ID: 36, LSP ID: 1
Time left in seconds (PATH refresh: 14, ttd: 141
RESV refresh: 36, ttd: 155)
Tspec: peak 0 kbps rate 0 kbps size 0 bytes m 20 M 65535
Fast Reroute: Facility backup desired
Setup priority: 4, hold priority: 3
Bandwidth: 0 kbps, hop limit: 255
Detour LSP: UP. Nexthop (link) protection available and is in use.
Up/Down times: 1, num retries: 0
Explicit path hop count: 4
10.0.0.1 (S) -> 10.0.0.38 (S) -> 10.0.0.2 (S) -> 10.0.0.5 (S)
Received RRO count: 4
Protection codes: P: Local N: Node B: Bandwidth I: InUse
10.0.0.9 -> 10.0.0.38 (P) -> 10.0.0.2 ->
10.0.0.5
RESV rcvfrom: 10.0.0.9 (p4/3(Trunk1) ) (MD5 OFF)
Riding bypass lsp: xmr1-by
To From St Style Lbl_in Lbl_out LSP name
10.33.33.33 10.0.0.2(BI) Up SE - 1032 xmr3-120
Tunnel ID: 36, LSP ID: 1
Time left in seconds (PATH refresh: 37, ttd: 155
RESV refresh: 36, ttd: 155)
Tspec: peak 0 kbps rate 0 kbps size 0 bytes m 20 M 65535
Explicit path hop count: 4
10.0.0.9 (S) -> 10.0.0.38 (S) -> 10.0.0.2 (S) -> 10.0.0.5 (S)
Received RRO count: 4
Protection codes: P: Local N: Node B: Bandwidth I: InUse
10.0.0.9 -> 10.0.0.38 (P) -> 10.0.0.2 ->
10.0.0.5
Backup Sent
PATH sentto: 10.0.0.9 (p4/3(Trunk1) ) (MD5 OFF)
RESV rcvfrom: 10.0.0.9 (p4/3(Trunk1) ) (MD5 OFF)
Riding bypass lsp: xmr1-by
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 291
53-1003031-02
Transit LSP statistics
1
Syntax: show mpls rsvp session name name