Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 223)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 199
53-1003031-02
use-bypass-liberal
1
use-bypass-liberal
The use-bypass-liberal command enables and disables backup query algorithm using minimum
restrictions to qualify bypass LSP. The use-bypass-liberal command can be executed without restart
and bypass LSP selection process uses the restricted or liberal mode, depending upon the current
configuration. Changing the computation mode on the fly does not impact the already selected
bypass LSPs. The [no] form of the command returns to the default status.
Syntax [no][cspf-computation-mode][use-bypass-liberal]
Command
default
By default, the backup query uses full restrictions to qualify bypass LSP during a backup query.
Parameters use-bypass-liberal
Use liberal mode for CSPF facility backup computation.
Command
modes
This command operates under the MPLS router mode by setting cspf-computation-mode to
use-bypass-liberal (config-mpls-policy).
Usage guidelines This mode works in conjunction with cspf-computation-mode use-bypass-metric option.
History
Release Command history
Multi-Service IronWare Release 05.6.00 This command option use-bypass-liberal was introduced.
Related
commands
None.