Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 706)

Brocade # show ip bgp vrf black neighbor 10.10.2.3 received extended-community
Extended-community ORF capability was not negotiated
Brocade# show ip bgp vrf black neighbor 10.10.2.3 received prefix-filter
No Prefix filter ORF received from neighbor 10.10.2.3!
682 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying BGP or MPLS VRF information
6
Displaying received routes for a specified VRF neighbor
To view the BGP4 VPNv4 configuration and statistics for specified VRFs neighbor, enter the
following command.
Brocade# show ip bgp vrf black neighbor 10.10.2.3 received-routes
Inbound soft reconfiguration not enabled for neighbor 10.10.2.3
Displaying a specified VRF neighbor routes
To view the route table for a specified VRF’s neighbor, enter the following command.
Brocade# show ip bgp vrf black neighbor 10.10.2.3 routes
There are 30 accepted routes from neighbor 10.10.2.3
Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix Next Hop Metric LocPrf Weight Status
1 10.100.100.1/32 10.10.2.3 100 0 BE
AS_PATH: 310
2 10.100.100.2/32 10.10.2.3 100 0 BE
AS_PATH: 310
3 10.100.100.3/32 10.10.2.3 100 0 BE
AS_PATH: 310
4 10.100.100.4/32 10.10.2.3 100 0 BE
AS_PATH: 310
5 10.100.100.5/32 10.10.2.3 100 0 BE
AS_PATH: 310
6 10.100.100.6/32 10.10.2.3 100 0 BE
AS_PATH: 310
7 10.100.100.7/32 10.10.2.3 100 0 BE
AS_PATH: 310
8 10.100.100.8/32 10.10.2.3 100 0 BE
AS_PATH: 310
9 10.100.100.9/32 10.10.2.3 100 0 BE
AS_PATH: 310
Syntax: show ip bgp vrf vrf-name neighbor ip-addr routes
For information about the fields in this display, refer to Table 121 on page 667.
Displaying the best routes
To display the routes received from a specific neighbor that are the “best” routes to their
destinations, enter a command such as the following at any level of the CLI.
Brocade# show ip bgp vrf black neighbor 192.168.4.211 routes best