Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 423)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 399
53-1003031-02
show mpls config
2
end of MPLS configuration
Output 3: Hello configuration with non-default configuration on interface ethernet 1/12 and with
configuration of hello-acknowledgements and non-default configuration at rsvp global level. And
RSVP Hello disabled on the interface ethernet 1/12.
Brocade# show mpls config
router mpls
policy
traffic-eng isis level-2
rsvp
rsvp-hello interval 25 tolerance 10
rsvp-hello acknowledgements
mpls-interface e1/12
rsvp-hello interval 15 tolerance 5
rsvp-hello disable
end of MPLS configuration
History
Release Command history
Multi-Service NetIron Release 05.6.00 The command was enhanced for when an option is used without a variable
specified, the configuration parameters for the option are shown for all
elements that match that option are displayed.
Multi-Service NetIron Release 05.5.00 This command was enhanced to display the label withdrawal delay setting.
Related
commands
None.