Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 703)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 679
53-1003031-02
Displaying BGP or MPLS VRF information
6
Displaying advertised routes for a specified VRF neighbor
To display the routes the Brocade device has advertised to a specific VRFs neighbor, enter a
command such as the following at any level of the CLI.
R3-2547# show ip bgp vrf black neighbor 10.10.2.3 advertised-routes
There are 154 routes advertised to neighbor 10.10.2.3
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST E:EBGP I:IBGP L:LOCAL
Prefix Next Hop Metric LocPrf Weight Status
1 10.100.101.30/32 10.10.3.3 0 BE
AS_PATH: 311
2 10.100.101.29/32 10.10.3.3 0 BE
AS_PATH: 311
3 10.100.101.28/32 10.10.3.3 0 BE
AS_PATH: 311
4 10.100.101.27/32 10.10.3.3 0 BE
AS_PATH: 311
5 10.100.101.26/32 10.10.3.3 0 BE
AS_PATH: 311
6 10.100.101.25/32 10.10.3.3 0 BE
AS_PATH: 311
7 10.100.101.24/32 10.10.3.3 0 BE
AS_PATH: 311
8 10.100.101.23/32 10.10.3.3 0 BE
AS_PATH: 311
9 10.100.101.22/32 10.10.3.3 0 BE
AS_PATH: 311
10 10.100.101.21/32 10.10.3.3 0 BE
AS_PATH: 311
Syntax: show ip bgp vrf vrf-name neighbor ip-addr advertised-routes [ip-addr/prefix]
For information about the fields in this display, refer to Table 109 on page 641.
Displaying neighbor attribute entries for a specified VRF
The neighbor attribute entries table lists the sets of BGP4 attributes stored in the router’s memory.
Each set of attributes is unique and can be associated with one or more routes. In fact, the Brocade
device typically has fewer route attribute entries than routes. To display the route-attribute entries
table for a specified VRF, enter the following command.
RcvWnd The size of the receive window.
SendQue The number of sequence numbers in the send queue.
RcvQue The number of sequence numbers in the receive queue.
CngstWnd The number of times the window has changed.
TABLE 125 BGP4 neighbor information (Continued)
This field... Displays...