GW Instek GBS-1000 Series User Manual - Manual (Page 101)

CONFIGURATION
101
8. Press F2 (Peak Detect) or F1
(Normal) and see that in the
Peak detection mode, spike
noise is captured.
Normal F 1
Peak
Detect
F 2
Peak Detect Normal
Select waveform memory length
Background Memory length defines the amount of waveform
data (points) included in each trigger event. Two
modes are available: short and long.
Short mode Each waveform includes fewer
points and is updated rapidly. It is
useful for observing the shape of
fast-changing waveform such as
Frequency Modulation.
Long mode Each waveform includes more
points and is updated relatively
slowly. It is useful for observing the
details of single-shot phenomenon
such as spike noise.
Panel operation 1. Press the Acquire key.
Acquire
2. Press F5 (Mem Leng) to
select the memory length
(points), short or long.
Mem Leng
500
F 5