GW Instek GBS-1000 Series User Manual - Manual (Page 128)

GBS-1000 Series User Manual
128
7. Press F2 (Coupling)
repeatedly to select the
trigger coupling.
Coupling
F 2
Range DC, AC
8. Press F3 (Rejection) to select
the frequency rejection
mode.
Rejection
Off
F 3
Range LF, HF, Off
9. Press F4 (Noise Rej) to turn
the noise rejection On/Off.
Noise Rej
Off
F 4
Range On, Off
10. Press F5 (Previous menu) to
go back to the previous
menu.
Previous
Menu
F 5
Use video trigger
Panel operation 1. Press the Trigger menu key.
MENU
2. Press F1 repeatedly to select
the video trigger. The video
trigger indicator appears at
the bottom of the display.
Type
Video
F 1
From left: channel, video trigger, polarity
3. Press F2 repeatedly to select
the trigger source channel.
Source
CH1
F 2
Range Channel 1 ~ 4