GW Instek GBS-1000 Series User Manual - Manual (Page 131)

CONFIGURATION
131
7. Press F1 (Slope) repeatedly
to select the trigger slope,
which also appears at the
bottom of the display.
Slope
F 1
Range Rising edge, falling edge
8. Press F2 (Coupling)
repeatedly to select the
trigger coupling.
Coupling
F 2
Range DC, AC
9. Press F3 (Rejection) to select
the frequency rejection
mode.
Rejection
Off
F 3
Range LF, HF, Off
10. Press F4 (Noise Rej) to turn
the noise rejection On/Off.
Noise Rej
Off
F 4
Range On, Off
11. Press F5 (Previous menu) to
go back to the previous
menu.
Previous
Menu
F 5