GW Instek GBS-1000 Series User Manual - Manual (Page 127)

CONFIGURATION
127
3. To turn Auto Level On/Off,
press F5 (Auto Level).
Auto Level
Off
F 5
Use edge trigger
Panel operation 1. Press the Trigger menu key.
MENU
2. Press F1 repeatedly to select
edge trigger. The edge
trigger indicator appears at
the bottom of the display.
Type
Edge
F 1
From left: channel, edge trigger, slope
3. Press F2 repeatedly to select
the trigger source.
Source
CH1
F 2
Range Channel 1 ~ 4, Line
4. Press F3 repeatedly to select
the trigger mode.
Mode
Auto
F 3
Range Auto, Normal, Single
5. Press F5 (Slope/coupling) to
set trigger slope and
coupling.
Slope /
Coupling
F 5
6. Press F1 (Slope) repeatedly
to select the trigger slope,
which also appears at the
bottom of the display.
Slope
F 1
Range Rising edge, falling edge