Gated measurements – GW Instek GBS-1000 Series User Manual User Manual
Page 65
Advertising
![background image](/manuals/367303/65/background.png)
MEASUREMENT
65
4. Press F5 (OFF) to clear the
measurement results from
the display.
OFF
F 5
Delay type
Delay type measurement is not available in this
mode. Use the Individual measurement mode
(page62) instead.
Gated Measurements
Background
Automatic measurements can be restricted to a
specific area (gating). When cursors are turned on,
the area between the cursors is used for automatic
measurements (Individual and Display All mode).
When cursors are turned off, measurements are
derived from all the points that are displayed on
screen (default mode).
Turn gating on
1. Turn cursors on to enable
gated measurement.
Set the cursors to a specific
area to create the gated
measurement region.
Advertising