Run data logging – GW Instek GBS-1000 Series User Manual User Manual
Page 95
Advertising
MEASUREMENT
95
Run Data logging
Background
Ensure the data source (page 93) and data logging
setup has been set (page 93).
Procedure
1. Insert a USB flash drive into
the USB front panel port.
2. Press the Utility key.
Utility
3. Press F5 (More) twice.
More
F 5
x2
4. Press F3 (Data Logging).
Data
Logging
F 3
5. Press F1 (Data Log) to turn
data logging On.
Data/image files start
logging to the USB flash
drive automatically. To stop
the data logging, press F2
(Data Log) again.
F 2
Data log
On
Advertising