GW Instek GBS-1000 Series User Manual - Manual (Page 149)

SAVE/RECALL
149
Ref Internal reference waveform, A~D
6. Press F4 (Save) to confirm
saving. When completed, a
message appears at the
bottom of the display.
Save F 4
Note
The file will not be saved if the
power is turned Off or the USB
drive is taken out before the
message appears.
USB file utility To edit the USB flash drive
contents (create/delete/rename
files and folders), press F5. For
details, see page140.
File
Utilities
F 5
PC software
(FreeWave) Saving a waveform is also
available through the
proprietary PC software,
downloadable from GWInstek
website.
Save display image
Panel operation 1. Connect the drive to the
front or rear panel USB port.
Note: Only one host
connection, front or rear, is
allowed at a time.
Front Rear
2. Press the Save/Recall key.
Save/Recall
3. Press F5 (More).
More F 5