GW Instek GBS-1000 Series User Manual - Manual (Page 112)

GBS-1000 Series User Manual
112
Timebase ≥100ms/div (≤250Sa/s)
Trigger Auto mode only
Waveform
Scan mode indicator
Scan mode indicator
(memory bar replaced)
Note  When the update mode switches from Main to
Scan, The GBS-1000 automatically selects the
Auto trigger mode. See page124 for trigger
details.
 To view the signal peak clearly in Scan mode,
turn on the Peak detection (page99).
Roll mode Updates and moves the waveform
gradually from the right side of the
display to the left. Manually selected when
the timebase (sampling rate) is slow.
Timebase ≥250ms/div (≤100Sa/s)
Trigger all modes
Waveform
Roll mode indicator
Roll mode indicator
(memory bar replaced)