GW Instek GBS-1000 Series User Manual - Manual (Page 147)

SAVE/RECALL
147
USB External flash drive, no practical
limitation on the number of files.
When saved, the setup file is
placed in the root directory.
5. Press F4 (Save) to confirm
saving. When completed, a
message appears at the
bottom of the display.
Save F 4
Note
The file will not be saved if the
power is turned Off or the USB
drive is taken out before the
message appears.
USB file utility To edit the USB flash drive
contents (create/delete/rename
files and folders), press F5. For
details, see page140.
File
Utilities
F 5
Save waveform
Panel operation 1. (For saving to an external
USB flash drive) Connect
the drive to the front or rear
panel USB port.
Note: Only one host
connection, front or rear, is
allowed at a time.
Front Rear
2. Press the Save/Recall key.
Save/Recall
3. Press F4 (Save Waveform).
The display shows the
available source and
destination options.
Save
Waveform
F 4