GW Instek GBS-1000 Series User Manual - Manual (Page 146)

GBS-1000 Series User Manual
146
Save panel setting
Panel operation 1. (For saving to an external
USB flash drive) Connect
the drive to the front or rear
panel USB port.
Note: Only one host
connection, front or rear, is
allowed at a time.
Front Rear
2. Press the Save/Recall key.
Save/Recall
3. Press F3 (Save Setup). The
display shows the available
file destinations.
Save
Setup
F 3
4. Press F3 (Destination)
repeatedly to select the
saved location. Use the
Variable knob to change the
memory location (S1 ~ S20)
or the file name
(DSxxxx.set).
Destination
USB
F 3
Memory Internal memory, S1 ~ S20