Auto set, Ge54) – GW Instek GBS-1000 Series User Manual User Manual
Page 54
Advertising
GBS-1000 Series User Manual
54
Auto Set
Background
Auto Set function automatically configures the
panel settings to position the input signal for the
best viewing conditions. The GBS-1000
automatically configures the following parameters.
Horizontal scale
Vertical scale
Trigger source channel
Panel operation
1. Connect the input signal to
GBS-1000 and press the
Auto Set key.
Auto Set
2. The waveform appears in the center of the
display.
Before
After
3. To undo Auto Set, press F5
(Undo).
Undo
Autoset
F 5
Limitation
Auto Set does not work in the following situation.
Input signal frequency is less than 20Hz
Input signal amplitude is less than 30mV
Advertising