GW Instek GBS-1000 Series User Manual - Manual (Page 80)

GBS-1000 Series User Manual
80
Edit: Source signal
1. Press the Utility key.
Utility
2. Press F5 (More).
More F 5
3. Press F3 (Go-NoGo Menu).
Go-NoGo
Menu
F 3
4. Press F2 (Source) repeatedly
to select the channel to be
tested. (Note: the selected
channel is automatically
activated)
Source
CH1
F 2
Edit: Continue or stop after NoGo
1. Press the Utility key.
Utility
2. Press F5 (More).
More F 5
3. Press F3 (Go-NoGo Menu).
Go-NoGo
Menu
F 3
4. Press F3 (Violating)
repeatedly to select whether
to continue or stop the test
after the NoGo condition is
met.
Violating
Stop
F 3
Stop The test stops when the NoGo
condition is met. The buzzer
does not sound.