I want to clean up the cluttered panel settings, The date and time settings are not correct, Usb does not work – GW Instek GBS-1000 Series User Manual User Manual
Page 176: The accuracy does not match the specification
GBS-1000 Series User Manual
176
I want to clean up the cluttered panel settings.
Recall the default settings by pressing Save/Recall key→F1. For
default setting contents, see page49.
The display image printout is too dark on the background.
Use the Inksaver function which reverses the background color. For
details, see page163.
The date and time settings are not correct.
For date and time setting details, please see page133. If it does not
help, the internal battery controlling the clock might be worn out.
Contact your dealer or GWInstek.
USB does not work.
Make sure you are not using the front and the rear USB host
connector at the same time. Disconnect either of the USB devices
and try again.
The accuracy does not match the specification.
Make sure the device is powered On for at least 30 minutes, within
+20°C~+30°C. This is necessary to stabilize the unit to match the
specification.
For more information, contact your local dealer or GWInstek at
www.gwinstek.com