GW Instek GBS-1000 Series User Manual - Manual (Page 161)

SAVE/RECALL
161
5. Press F2 (Source) repeatedly
to select the file source,
internal memory or external
USB. Use the Variable knob
to change the memory
location (S1 ~ S20) or the file
name (DSxxxx.csv).
Source F 2
Memory Internal memory, W1 ~ W20
USB External flash drive, no
practical limitation on the
numbers of files. The
waveform file must be placed
in the root directory to be
recognized.
6. Press F3 (Destination). Use
the Variable knob to select
the memory location.
Destination
USB
F 3
RefA ~ D Internally stored reference
waveforms A ~ D
7. Press F4 (Recall) to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Recall F 4
Note
The file will not be saved if the
power is turned Off or the USB
drive is taken out before the
message appears.