GW Instek GBS-1000 Series User Manual - Manual (Page 163)

PRINT OUT
163
P
RINT OUT
The Hardcopy key is used as quick-save or quick-print key. The
Hardcopy key can be assigned either to printout screenshots or to
save files.
When assigned to “Print” the screen image can be printed to a
PictBridge compatible printer using the USB device port. To reduce
the amount of printer ink used for each print, images can be
printed using the Ink Saver function.
Display printout is also available using proprietary PC software,
downloadable from the GWInstek website.
Overview
Printout step Listed below are the steps that have to be followed
when printing out the display image through the
USB port.
1. Connect the printer to the USB host port.
2. Configure the interface to printout mode.
3. Configure the content and printout.
4. Printout.
1 Connect printer
1. Connect the PictBridge compatible printer to
the USB host port, front or rear panel.
Front panel Rear panel