GW Instek GBS-1000 Series User Manual - Manual (Page 117)

CONFIGURATION
117
4. Press F5 (XY). The display
shows up to three
waveforms in X-Y format
waveforms simultaneously;
Channel 1 as X1-axis,
Channel 2 as Y1-axis,
Channel 3 as the Y2-axis
and Channel 4 as the Y3-
axis.
XY F 5
A single X-Y waveform is shown above.
5. The Horizontal Position
knob and Time/Div knob
are disabled under the X-Y
mode. To move the
waveform position, use the
vertical position knobs:
Channel 1 knob moves all
the waveforms horizontally.
Channel 2 moves the first
vertically.
Channel 3 moves the second
waveform vertically.
Channel 4 moves the third
waveform vertically.