GW Instek GBS-1000 Series User Manual - Manual (Page 159)

SAVE/RECALL
159
5. Press F2 (Source) repeatedly
to select the file source,
internal memory or external
USB. Use the Variable knob
to change the memory
location (S1 ~ S20) or the file
name (DSxxxx.set).
Source
USB
F 2
Memory Internal memory, S1 ~ S20
USB External flash drive, no practical
limitation on the number of files.
The setup file must be placed in the
root directory to be recognized.
6. Press F4 (Recall) to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Recall F 4
Note
The file will not be saved if the
power is turned Off or the USB
drive is taken out before the
message appears.
USB file utility To edit the USB flash drive
contents (create/delete/rename
files and folders), press F5. For
details, see page140.
File
Utilities
F 5