GW Instek GBS-1000 Series User Manual - Manual (Page 89)

MEASUREMENT
89
4. Press F3 (Item) repeatedly to
select the three parameters
for a step: panel setup,
menu (Cursor or Automatic
measurement), and time.
Use the variable knob to
edit the valued of the
selected item.
Item
Menu
F 3
Setup Selects the panel setup stored in the
internal memory. S01 ~ S20. For
panel setup store/recall details, see
page146 (save) or page157 (recall).
Menu Selects the measured item: Cursor
or Automatic measurement.
Time Sets the duration of the step, 1 ~ 99
seconds or user control (Run/Stop).
When Run/Stop is selected, the
program freezes at that step until
the user presses the Run/Stop key.
5. Continue the above for all
program steps. When
completed, press F5 (Save)
to confirm and save the
program.
Save F 5