Edit: buzzer sound, Edit: nogo when, 79 edit: nogo when – GW Instek GBS-1000 Series User Manual User Manual
Page 79
Advertising
MEASUREMENT
79
Edit: Buzzer sound
Panel operation
1. Press the Utility key.
Utility
2. Press F3 repeatedly to select
the buzzer for a test fail
(NoGo) notification.
Off
F 3
High pitch
Middle pitch
Low pitch
Sound Off
Note
The buzzer setting also affects the vertical
resolution calibration (page171) – the buzzer
notifies the completion of calibration.
Edit: NoGo when
1. Press the Utility key.
Utility
2. Press F5 (More).
More
F 5
3. Press F4 (NoGo When)
repeatedly to select the
NoGo condition.
NoGoWhen
F 4
NoGo when the waveform is
outside of the boundary
NoGo when the waveform is
inside the boundary
Advertising