GW Instek GBS-1000 Series User Manual - Manual (Page 115)

CONFIGURATION
115
4. Press F3 (Window Zoom).
The specified range gets
zoomed. The ZOOM
indicator appears on the
bottom left side of the
display.
Window
Zoom
F 3
Zoom Range
5. To go back to the original
view, press F1 (Main).
Main F 1
Show waveform in X-Y mode
Background The X-Y mode compares the voltage of the
Channel 1 waveform and the Channel 2, 3 & 4
waveforms in a single display. This mode is useful
for observing the phase relationship between two
or more channels.