Horizontal view, Move waveform position horizontally, Ge108) – GW Instek GBS-1000 Series User Manual User Manual
Page 108: Select horizontal scaleselect waveform update
Advertising
GBS-1000 Series User Manual
108
Horizontal View
This section describes how to set the horizontal scale, position, and
waveform display mode.
Move waveform position horizontally
Panel operation
The horizontal position knob
moves the waveform left/right.
As the waveform moves, the
memory bar appears on the top
of the display indicating the
portion of the displayed
waveform that is in memory.
Run mode
In Run mode, the memory bar keeps its relative
position in the memory since the entire memory is
continuously captured and updated.
Stop mode
In Stop mode, the memory bar moves along with
the waveform until it reaches the end of the
memory.
Advertising