Set display contrast, Freeze the waveform (run/stop), 106 freeze the waveform – GW Instek GBS-1000 Series User Manual User Manual
Page 106
Advertising
GBS-1000 Series User Manual
106
Set display contrast
Panel operation
1. Press the Display key.
Display
2. Press F4 (Contrast).
Contrast
F 4
3a. Turn the Variable knob left
to lower the contrast (dark
display).
Contrast
F 4
3b. Turn the Variable knob
right to raise the contrast
(bright display).
Contrast
F 4
Freeze the waveform (Run/Stop)
For more details about Run/Stop mode, see page55.
Panel operation
1. Press the Run/Stop key. To
unfreeze the waveform,
press the Run/Stop key
again.
Run/Stop
2. The waveform and the
trigger freezes. The trigger
indicator on the top right of
the display shows Stop.
Advertising