GW Instek GBS-1000 Series User Manual - Manual (Page 87)

MEASUREMENT
87
Program
Overview
Background The Program function measures input signals
using cursors or automatic measurement
functions, with a user-defined sequence, duration,
loop count, and panel settings. This feature is
useful for automated and repetitive measurement,
such as in assembly lines or quality inspection
tests.
Parameter Program set 1 set
Program step Maximum 20 steps
Measurement
item Cursor or Automatic
measurement
Time (duration)
per step 1 ~ 99 seconds, or user activation
Program loop 1 ~ 99 loops, the first and last step
settable
Programming
step 1. Show the target waveform on the display and
decide the type of measurement that needs to
be done: Horizontal/Vertical Cursor or
Automatic measurement.
2. Setup the other panel configurations: trigger,
acquisition, horizontal/vertical scale, etc. Save
the settings to the internal memory. See
page146 for details.
3. Edit the program (page88) using the internally
stored panel setup.
4. Run the program (page90).