Fan (ioam), Attributes, Actions – HP NonStop G-Series User Manual
Page 111: Fc-al i/o module
Fan (IOAM)
component that circulates air into the enclosure to help maintain optimal temperature.
There are two fans in each IOAM, for a total of four in each IO enclosure.
Note: If a ServerNet switch board is not present, the IOAM fans will not appear in OSM.
For information on how to replace an individual IOAM Fan, see Replacing a Fan in an IOAM
Enclosure in the Support and Service > Service Procedures > IOAM Hardware Servicing collection
in NTL.
Location in OSM Tree: System > Group > IOAM Enclosure > IOAM > Fan
Example: Fan (13.2.16)
Attributes
Physical
LED State
Indicates whether or not the fans amber LED is lit. This state is determined by the
action.
Value: On or Off
Manufacturer Identifies the manufacturer of the component.
Logical
Device State The state of the component as known to the operating system on the server.
Actions
Set LED State
Turns on or off the amber LED located on the fan. The current state is indicated by the
attribute.
FC-AL I/O Module
Subcomponent of a