HP NonStop G-Series - Manual (Page 152)

Attributes
Module
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Physical Location
The values displayed by these attributes are assigned through the Set Physical Location action.
Rack Name
A user-defined name assigned to identify the rack in which the module is
located.
Rack Offset
A number (from 1 to 42) assigned to describe the location of the module
within the rack.
Locator
An optional text string assigned to further identify the physical location of
the module.
This attribute is displayed only if a value is specified using the Set Physical
Location action.
Alarm Panel Identifier
For Telco systems only.
Displays the system alarm panel (SAP) identifier for this hardware resource,
as specified through the Alarm Panel Identifier option within the
Set
Physical Location action. This attribute is displayed only if a value is
specied through the action.
Temperature Sensor
Current Value The current temperature, in degrees Celsius (°C), inside the enclosure of the module.
Actions
Rediscover
Causes OSM to refresh and reanalyze all components within the module. Use this action in situations
such as:
OSM does not recognize a new CRU following a CRU replacement. ●
An alarm remains after the alarm condition has been fixed. ●
Redundant Power Scrub
Tests fault tolerance of the power environment within the module. If the results of the action indicate
a problem, check the Power State attribute of the individual CRUs to determine where the problem
lies.