Attributes – HP NonStop G-Series User Manual
Page 264
Attributes
Switch Port
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Transceiver Physical
Type
The type of transceiver.
Example: 50/125 - 62.5/125 Micron MMF
Part Number
The vendor part number of the transceiver.
Serial Number
The vendor serial number of the transceiver.
Manufacturer
Identifies the manufacturer of the component.
Hardware Revision The vendor hardware revision of the transceiver.
Logical
Connectivity Status
The status of the port.
Values:
Port reset
Loss of optical signal
Transceiver absent
PIC absent
No link alive
Link Alive - Port disabled
Neighbor check in progress
Neighbor check complete - Port disabled
Neighbor check failed - No link alive
Connected to node
Connected to switch with wrong numeric selector
Connected to switch with invalid configuration version identifier
Connected to wrong port
Connected to different switch
Connected to switch with incompatible configuration
No response to Manage Port command from neighbor port
Manage Port command not acknowledged (NACKed) from
neighbor port
Port enabled
Invalid
Unknown