HP NonStop G-Series - Manual (Page 255)

Planning and Installation Guide.
Optional Parameter: File Name the name of the configuration file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Dump
Copies a memory image from a 6780 switch to a specified file on the local system.
Firmware Update
Loads a firmware file from the local node to the switch logic board. For details, see the
ServerNet Cluster 6780 Planning and Installation Guide.
Optional Parameter: File Namethe name of the firmware file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
FPGA Update
Loads an FPGA code file from the local node to the switch logic board. For details, see the
ServerNet Cluster 6780 Planning and Installation Guide.
Optional Parameter: File Namethe name of the FPGA code file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Hard Reset
Hard resets the switch logic board.
SCF Equivalent: RESET SWITCH, HARD
Replace
Invokes the Replace Switch Component guided procedure that helps to replace the switch logic
board.
Soft Reset
Soft resets the switch logic board.
SCF Equivalent: RESET SWITCH, SOFT