HP NonStop G-Series - Manual (Page 194)

Slot Location: WAN CRUs are external to the enclosures.
Example: SWAN2 $ZZWAN.#SWAN2
Attributes
SWAN $ZZWAN
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Physical
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Adapter Type
The type of SWAN concentrator.
Values: Synchronous or Firmware Controlled
Adapter State
The state of the SWAN concentrator CRU as known to the operating
system.
Values: Started, Stopped, Starting, Stopping, Aborted, Aborting,
Out Of Service, Unknown, Not Configured
Primary Host IP Address The primary host IP address configured for the SWAN concentrator.
Alternate Host IP Address
The alternate host IP address configured for the SWAN
concentrator.
Primary TCP/IP Process
The primary TCP/IP process configured for the SWAN concentrator.
Example: $ZTCP2
Alternate TCP/IP Process
The alternate TCP/IP process configured for the SWAN
concentrator.
Example: $ZTCP1
Primary Subnet Mask
The name of the subnet mask configured for the primary host IP
address for the SWAN concentrator.
Example: 255.255.255.0