HP NonStop G-Series - Manual (Page 204)

Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Logical
Current Topology The maximum processor configuration for the service processor. Values
Stored Topology
The maximum processor configuration for the service processor that will be
set the next time the system or enclosure is powered on.
Values
System Serial Number
A unique identification number assigned to a server when it is
manufactured. This number is passed automatically to your service provider
when OSM dials out an incident report. Your service provider tracks
systems using system serial numbers.
System Type
Indicates whether the system is a standard "Commercial" or "Central Office"
(Telco) system.
Operating System
Version
The release version update of the operating system that is running on the server.
Example: G06.26
Other values that might be displayed for Operating System Version are Not Running and
Halted.
System Services
Advanced Storage Configuration State
Indicates whether or not the system has been configured to
allow advanced storage configurations. This feature is
enabled/disabled using the
Enable and Disable Advanced
Storage Configuration actions.
Currently supported advanced storage configurations
include Flexible Disk Configuration (see FDC Support Note
for more information) and
ESS disk configuration (this
attribute must be enabled before you can configure ESS
disks in SCF).
Values: Enabled, Disabled, Unknown
Data Collection Services
Automatic Data Collection State
Indicates whether automatic data collection for failed
system resources is enabled or disabled. To change this
attribute state, use the
Enable/Disable Automatic Data
Collection action.