HP NonStop G-Series - Manual (Page 173)

Power Supply (FCDM)
Attributes
Actions
Subcomponent of a FCDM . There are two power supplies in each FCDM.
Location in OSM Tree: System > Group > FCDM Collection > FCDM > Power Supply
Example: Power Supply (111.211.1.95)
Attributes
Power Supply
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Physical
LED State
Indicates whether or not the power supplys (amber) fault LED is blinking.
Value: Blinking or Off
Type The vendor hardware type.
Logical
AC Power State Whether the power source is On or Off.
Device State
The state of the component as known to the operating system on the
server.
Values
Vendor Hardware Revision
A code that identifies the generation of the component provided by its
supplier.
Actions
Blink LED Off
Turns off the blinking of the power supplys (amber) fault LED.
SCF Equivalent: SCF Control SAC $ZZSTO.#sac-name, deviceid(shelf,bay), LED OFF
Blink LED On
Causes the power supplys (amber) fault LED to blink on and off.
SCF Equivalent: SCF Control SAC $ZZSTO.#sac-name, deviceid(shelf,bay), LED ON