HP NonStop G-Series - Manual (Page 239)

Tests the connectivity of the switch module from the local node.
Set Locator
Allows you to enter text to aid in locating or identifying the switch. This text is displayed as the
Locator attribute. These ASCII characters cannot be used in the Set Locator field: =, +, &, or %.
Also, copy and paste features do not work in this field. For more information, see
Specifying a
Cluster Switch Locator String .
Parameter: Locator Free-form text up to 64 characters long.
Example: Switch On Left in 1205
SCF Equivalent: SCF ALTER SWITCH $ZZSMN, FABRIC { X | Y }, ZONE { 1 | 2 | 3 },
LAYER { 1 | 2 | 3 | 4 }, LOCATOR string
AC Transfer Switch
Attributes
Actions
A component of a 6770 switch module that automatically switches to a backup AC power
source if the primary source fails.
Location in OSM tree: External ServerNet Fabric > Switch Module > AC Transfer Switch
Example: AC Transfer Switch $ZSMN.X1
Attributes
AC Transfer Switch
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Logical
Backup Rail Power State
The state (On or Off) of the backup power source for the switch. If
both the primary and backup sources of power fail, the UPS
provides two hours of backup power.
Primary Rail Power State
The state (On or Off) of the primary power source for the switch. If
both the primary and backup sources of power fail, the UPS
provides two hours of backup power.