HP NonStop G-Series - Manual (Page 116)

FCDM Collection
Attributes
Actions
The OSM Service Connection displays all Fibre Channel disk modules (FCDMs) within FCDM
Collection objects, whether or not they are daisy-chained. FCDMs that are daisy-chained together
(up to four) are displayed within the same FCDM Collection object. If an FCDM Collection object
contains only one FCDM, it is not daisy-chained. Other FCDMs that are not daisy-chained appear
under separate in FCDM Collection objects.
The FCDM Collection object appears within the same group object as the IOAM enclosure to which
the FCDM is connected. If the FCDM is connected to Fibre Channel ServerNet adapters located in
different IOAM enclosures (for increased fault tolerance), OSM displays the FCDM Collection in the
lower-numbered group.
For information on daisy-chaining FCDMs, see the Modular I/O Installation and Configuration
Guide in NTL.
Location in OSM Tree: System > Group > FCDM Collection
Example: FCDM Collection (111.211)
Attributes
FCDM Collection
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Path B
Configured Controller Location
The location of FCSA connected to the disk drive through Port B.
Example: FCSA.FSAC-1.GRP-111.MOD-2.SLOT-1
Fibre Channel Controller
Identifies the FCSA FSAC connected to the FCDM through Port B.
Example: FCSA FSAC (111.2.1.1)
Path A
Configured Controller
Location
The location of FCSA connected to the disk drive through Port A.
Example: FCSA.FSAC-1.GRP-111.MOD-3.SLOT-1
Fibre Channel Controller
Identifies the FCSA FSAC connected to the FCDM through Port A.
Example: FCSA FSAC (111.3.1.1)