Sac (servernet addressable controller), S) with four ports each, providing up, Addressable controller – HP NonStop G-Series User Manual
Page 178: Which contains one ethernet physical interface, Ethernet servernet addressable controllers (e4sa
Online Boot Millicode Firmware Update
Updates the Boot Millicode firmware running on the processor.
Online Boot Millicode Firmware Update is not supported for processors in S7000 PMF CRUs or on
systems running G06.11 or older. The related attributes and action are not displayed for processors
on which this action is not supported.
Optional Parameter: File Name
Reload
Loads the operating system into the processor from a specific disk location.
Reset
Stops the processor and terminates all processes running on it. Places the processor in a known state,
ready for a Prime for Reload action or Load action.
Responsive Test
Verifies that the processor is configured and responding.
SAC (ServerNet Addressable Controller)
A LAN controller that is a component of one of these CRUs:
CRU SACs in CRU PIFs in SAC
CCSA
4
4
E4SA
2
2
FESA
1
1
GESA
1
1
TRSA
1
1
Location in OSM Tree: System > Group > Module > CRU > SAC
Slot Location: SACs are located on the CRUs that might be installed in slots 53 and 54 in processor
enclosures (service side) or in slots 51, 52, 53, and 54 in I/O enclosures (service side).
Example: E4SA SAC $ZZLAN.E4SA0.0